×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
Elastix 2.0.3 openVox A800P
×
Questions about A400/800/1200 Analog Interface Card
Elastix 2.0.3 openVox A800P
13 years 2 months ago #6679
by azjsans
Thank you for the quick reply, I downloaded dahdi from
http://downloads.openvox.cn/pub/drivers/dahdi-linux-complete/
,
Everything ran ok, but still cannot see any channels
rcbfx: DAHDI Tools Version - 2.4.0
DAHDI Version: 2.4.0
Echo Canceller(s):
Configuration
======================
Channel map:
0 channels to configure.
[ OK ]
No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg: [ OK ]
[root@pbx /]#
When I run dahdi_genconf I get the following:
[root@pbx /]# dahdi_genconf
Empty configuration -- no spans
Empty configuration -- no spans
[root@pbx /]#
Still not sure how to get it working.
Is there something else I can check to see what the issue might be?
Thank you for your help.
13 years 2 months ago #6680
by svolta
Please show me the output by command 'dmesg', you can send it to my Email, my Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
13 years 2 months ago #6681
by azjsans
Ok, I just sent the "dmesg" output to your email
13 years 2 months ago #6775
by vmiro
I know that A1200P card is recognized by Elastix and A800P is not??
Less
More
Posts: 4
Thank you received: 1
13 years 1 month ago #6780
by Denins.Den
Please send SSH to svolta , he will check this for you
This email address is being protected from spambots. You need JavaScript enabled to view it.
Forum
Telephony Cards Support
A400/800/1200 Series
Elastix 2.0.3 openVox A800P
Time to create page: 0.044 seconds